Motor power P1
Motor power P2
Collection tank (Composite) Pump housing (Glass fibre reinforced plastic) Impeller (Composite) Motor housing, cutting system, rotor shaft (Stainless steel)
Domestic drainage water, domestic water with faeces. 35°C, short term up to 60°C.
Single-phase electric motor with thermal sensors embedded in the winding. Insulation Class B. Degree of protection IP 68. Stainless steel rotor shaft, pre-lubricated bearings, double mechanical seal.
Odour-tight plastic collection tank. Maximum utility volume 11.5 litres. Lateral WC-inlet: DN 100 horizontal, inlet height 180 mm. Two inlets DN 40 with integrated nonreturn valves for shower or hand basin. Discharge 25 mm diameter with integrated non-return valve. Air vent with activated carbon filter.
Saniflux V is also ideal for subsequent installation of sanitary facilities. The symmetrical design of the collection tank allows an installation alternatively on right or left side of the WC. The built-in submersible pump with its stainless steel cutter system reduces soft solids to small pieces. A discharge pipe with 1“ minimum diameter can be easily installed with minimum construction work.
Impeller of the Saniflux V series.
For optimum adaptation to the pump medium and operating conditions.
- OPEN MULTI-CHANNEL IMPELLER
For dirty and muddy media with solids.
- GRP CUTTER SYSTEM
Cutting system upstream of the impeller for grinding solids.