SPECIFICATIONS
Discharge size | Motor power P1 |
Da 25 | 0,5 kW |
Max. head | Motor power P2 |
5,8 m | 0,3 kW |
Max. flow | |
4,3 m³/h |
MATERIALS
Collection tank (Composite) Pump housing (Glass fibre reinforced plastic) Impeller (Composite) Motor housing, cutting system, rotor shaft (Stainless steel 1.4301)
PUMPED LIQUID
Domestic drainage water, domestic waste water with faeces. 35°C, short term up to 60°C.
MOTOR
Single-phase electric motor with thermal sensors embedded in the winding. Insulation Class B. Degree of protection IP 68. Stainless steel rotor shaft, pre-lubricated bearings, double mechanical seal.
COLLECTION TANK
Odour-tight plastic collection tank. Maximum utility volume 11.5 litres. WC-inlet: DN 100 horizontal, inlet height 180 mm. Two lateral inlets DN 40 with integrated non-return valves. Discharge 25 mm diameter with integrated non-return valve. Air vent with activated carbon filter.
FEATURES
The built-in submersible pump with ist stainless steel cutter system reduces soft solids to small pieces. The discharge pipe with 1“ minimum diameter can be easily installed with minimum construction work.
IMPELLER
Impeller of the Sanifox series.
For optimum adaptation to the pump medium and operating conditions.
- OPEN MULTI-CHANNEL IMPELLER
For dirty and muddy media with solids.
- GRP CUTTER SYSTEM
Cutting system upstream of the impeller for grinding solids.