Motor power P1
Da 28 – 34
Motor power P2
Collection tank (Composite) Pump housing (Glass fibre reinforced composite) Impeller (Glass fibre reinforced composite) Motor housing (Stainless steel 1.4301) Rotor shaft (Stainless steel 1.4021) Cutting system (Stainless steel 1.4122)
Domestic drainage water, domestic water with faeces. 35°C, short term up to 60°C.
Single-phase electric motor with thermal sensors embedded in the winding. Insulation Class B. Stainless steel rotor shaft, pre-lubricated bearings.
Odour-tight plastic collection tank with separate dry area. Maximum utility volume 11 litres. WC-inlet DN 100 horizontal, inlet hight 180 mm (DIN 1387 Form A / DIN 1388 Form A). Two late ral inlets DN 40 with integrated non-return valve, sealing ring. Discharge Da 28-34 mm diameter with integrated ball backflow preventer. Air vent with activated carbon filter.
The built-in drainage pump with its powerfull stainless steel cutter system reduces reliable feces and toilet paper. The discharge pipe with 25 mm minimum diameter can be easily installed with minimum construction work. The WC-inlet allows installation directly behind the WC, with minimal space. The new tank design with separate dry area allows easy access in case of service. Potential-free collective fault message optionally retrofittable, see accessories.
Impeller of the SaniQ cut series.
For optimum adaptation to the pump medium and operating conditions.
- OPEN MULTI-CHANNEL IMPELLER
For dirty and muddy media with solids.
- GRP CUTTER SYSTEM
Cutting system upstream of the impeller for grinding solids.