SPECIFICATIONS
Spherical clearance | Max. flow |
40 mm | 28,0 – 34,0 m³/h |
Discharge size | Motor power P1 |
DN 80 | 1,2 – 1,6 kW |
Max. head | Motor power P2 |
9,5 – 12,5 m | 0,9 – 1,2 kW |
MATERIALS
Collecting Tank (Polyethylene) Impeller (Cast steel) Pump flange, Motor housing cover (Glass-fibre, reinforced synthetic material (composite)) Pressure cover non-return valve (Cast iron) Non-return valve housing (Composite) Motor housing (Stainless steel) Rotor shaft (Stainless steel) Mechan. connection parts (Stainless steel) Seal kit (Perbonane)
PUMPED LIQUID
Clear water or drainage water, waste water or sewage containing soft solids. Max. liquid tem- perature: 35°C, short term up to 60°C.
MOTOR
Fully submersible, pressure tight electric motor, 1Ph or 3Ph. Thermal sensors embedded in the winding. Insulation class F. Degree of protection IP 68. Stainless steel rotor shaft, pre-lubricated bearings.
COLLECTION TANK
Odour and gas tight plastic collecting tank:
- DN 100 horizontal, 180 mm height
- DN 100 horizontal, 250 mm height
- DN 100 vertical
- DN 150 horizontal und vertical
- DN 40 vertical.
Discharge: Flange DN 80.
FEATURES
Even if there is a natural fall, if the sewer is flooded, the sewage is unable to drain. In this case, HOMA Sanistar C will prevent a back up and flooding of the room. HOMA Sanistar C is the ideal solution for new constructions or renovation of old constructions. They are used for applications in: – single-family homes – basement flats – sanitary facilities in private cellar rooms
IMPELLER
Impeller of the Sanistar C series.
For optimum adaptation to the pump medium and operating conditions.
VORTEX IMPELLER
For coarse and fibrous polluted, braid-forming and gaseous media.