Brine Lifting Units

Brine Lifting Units – Solestar

APPLICATION

Below the backwater level, in which brine is obtained from water softening systems, must be disposed of by means of an automatic brine application. The Solestar lifting system is a ready-to-install pumping system for the pumping of brine, which is generated by the backwashing of water softening systems. This brine is collected in the collection tank and transported into the sewage system depending on the water level.

SPECIFICATIONS

Discharge size	Motor power P1
3/4″ “	0,12 kW
Max. head	Motor power P2
5 m	0,16 kW
Max. flow
4,2 m³/h

MATERIALS

Collecting tank (Plastic) Pump housing (Plastic) Impeller (Plastic) Motor housing (Aluminium AIMg3) Motor shaft (Stainless steel) Bolts (Stainless steel) Lip seal (FPM, Viton) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Deep Groove Ball Bearing)

PUMPED LIQUID

Brine and cold water, Salt content approx. 27 %. Max. liquid temperature: 40°C.

MOTOR

Motor 230V/1Ph. Insulation class F, Degree of protection IP 55.

COLLECTION TANK

Corrosion-resistant plastic container. Volume 13 liters. Two 8 mm / 10mm inlets on top face. Pressure Connection ¾” hose fitting incl. non-return valve. Pumps: Sealless pumps with open impeller (free passage 4mm) . Level control: storage pressure switch with timer.

IMPELLER

Impeller of the Solestar series.

For optimum adaptation to the pump medium and operating conditions.

OPEN SINGLE-CHANNEL IMPELLER

For dirty and muddy fluids with solid and fibrous components.

Brine Lifting Units – Solestar