CK – Stainless steel sewage pumps

APPLICATION

Pumping of domestic, municipal and industrial effluent and waste water, sewage, sludge and liquid chemicals. Also suitable for liquids with solid and fiber content.


TECHNICAL DATA SHEET

P-Motor_DE_GB

T-Motor_DE_GB

INSTALLATION

Single-stage submersible pumps in close-coupled design for permanent or transportable usage.

MATERIALS

Motor housing (Stainless steel 1.4436) Pump housing (Stainless steel 1.4408) Impeller (Stainless steel 1.4408) Wear ring (Stainless steel) Motor shaft (Stainless steel 1.4462) Bolts (Stainless steel) Elastomeres (FPM, Viton) Cable jacket (Polyolefine) Mechanical seal on medium side (SiC / SiC, Viton) Mechanical seal on motor side (SiC / SiC, Viton) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Two angular ball bearings)

PUMPED LIQUID

Max. medium temperature: 40 °C, short term up to 60 °C.

MOTOR

Electric motors, with 4-pole motor speed. Insulation class H, degree of protection IP 68. Thermal sensors embedded in the stator winding protect the motor from overheating. PTC sensors on request.

SHAFT/BEARING

Large diameter stainless steel rotor shaft, pre-lubricated bearings. SEALS Two independently working silicon-carbide mechanical seals in tandem-arrangement. Oil-filled seal chamber with possibility of control by the inspection screw.

FEATURES

Robust pump unit completely made from stainless steel suitable also for corrosive liquids. Construction made from premium components as well as standard equipped with protection devices to guarantee extended life time and high grade of reliability.

IMPELLER

For optimum adaptation to the pump medium and operating conditions.
1. ENCLOSED MULTI-CHANNEL IMPELLER For dirty and muddy fluids with solids.
Scroll to Top
Scroll to Top