Flood Emergency Kit – FLUT-SET

Complete kits for emergency use during flooding

APPLICATION

At abrupt high watermark the Flut-Set is ready just in few steps for pumping water from basements, cellars etc.


TECHNICAL DATA SHEET

SPECIFICATIONS

Spherical clearance

Max. flow

20 mm

11,5 m³/h

Discharge size

Motor power P1

G 1¼ F

0,63 kW

Max. head

Motor power P2

7,3 m

0,45 kW

INSTALLATION

Easy handling: Just put the carrying cage with the pump on the ground, connect hose and coupling, connect the power supply and the pump starts operation.

MATERIALS

Pump housing, motor housing, impeller, rotor shaft, screws (Stainless steel) Seal kit (NBR) Mechanical seal (Carbon-graphite/chrome-steel) Carrying cage (Polyethylene)

PUMPED LIQUID

Clear water and drainage water containing soft solids up to 20 mm spherical clearance. Max. liquid temperature: 35°C, short term up to 60°C.

MOTOR

Fully submersible, pressure tight electric motor. Stainless steel motor and pump housing. Insulation class F. Motor protection IP 68. Thermal sensors imbedded in the motor winding.

FEATURES

The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation. The Flood Emergency Kit consists of:

  • Stainless steel submersible pump type CR360 V WA with float-switch
  • 10 m of synthetic hose 32 mm with C-Coupling
  • carrying cage for transport, storage and for sludge protecting during the operation

IMPELLER

Impeller of the Flut-Set series.

For optimum adaptation to the pump medium and operating conditions.

VORTEX IMPELLER

For coarse and fibrous polluted, braid-forming and gaseous media.

Scroll to Top
Scroll to Top