H307 / H313 / H328V – Submersible pumps for clear and drainage water

Cast iron submersible pumps for hot water

CHARACTERISTICS

Submersible pumps for clear and drainage water – H307 / H313 / H328V

APPLICATION

HOMA H 300 are submersible drainage pumps for pumping clear water or drainage water with high temperatures. With the advantage of thick wall casting for dissipation of heat and viton seals, they are the ideal solution to pump condensate, clear water or drainage water up to 90°C. The models H 307 and H 313 are used for pumping clear water or drainage water up to 10 mm spherical clearance, model H 328 V up to 28 mm spherical clearance. They are suitable for laundries, car washes, food industries and many other applications.


TECHNICAL DATA SHEET

SPECIFICATIONS

Spherical clearance

Max. flow

10 – 28 mm

19,5 – 25,5 m³/h

Discharge size

Motor power P1

G 1½ F

0,7 – 1,2 kW

Max. head

Motor power P2

10,0 – 12,5 m

0,5 – 0,9 kW

INSTALLATION

Permanent or transportable. Model with float switch control for automatic pump operation, depending on liquid level in the sump.

MATERIALS

Suction sieve, suction cover, motor bearing housing, motor housing, motor housing cover, impeller (Cast iron EN-GJL-250) Rotor shaft, screws (Stainless steel) Seal kit (VITON) Cable (Silikon)

PUMPED LIQUID

Condensate, clear water or drainage water. Max. liquid temperature: 90°C.

MOTOR

Fully submersible, pressure tight electric motor, oil filled. Insulation class H. Degree of protection IP 68.

IMPELLER

Impeller of the H307 / H313 / H328V series.

For optimum adaptation to the pump medium and operating conditions.

  • OPEN MULTI-CHANNEL IMPELLER

For dirty and muddy media with solids.

  • VORTEX IMPELLER
For coarse and fibrous polluted, braid-forming and gaseous media.
Scroll to Top
Scroll to Top