H82 / H16 – Submersible pumps for clear and drainage water

Wear resistant submersible pumps

CHARACTERISTICS

Submersible pumps for clear and drainage water – H82 / H16

APPLICATION

HOMA H 82 and H 16 are wear resistant submersible drainage pumps. With their 10 mm spherical clearance they are the ideal solution to pump clear water or drainage water with abrasive sand or mud additives. They are used to pump surface water from sumps, subways and building sites, supply of industrial water, application on board ships etc.


TECHNICAL DATA SHEET

SPECIFICATIONS

Spherical clearance

Max. flow

10 mm

15,5 – 25,6 m³/h

Discharge size

Motor power P1

G 1½ F

0,65 – 0,85 kW

Max. head

Motor power P2

9,5 – 13,8 m

0,5 – 1,1 kW

INSTALLATION

Permanent or transportable. Model with float switch control for automatic pump operation, depending on liquid level in the sump.

MATERIALS

Motor housing, motor housing cover, motor bearing housing, suction sieve (Aluminium) Suction cover (Aluminium rubberized) Impeller (Cast iron GG/EN-GJL-250) Rotor shaft, screws (Stainless steel) Seal kit (Perbonane)

PUMPED LIQUID

Clear water or drainage water containing soft solids up to 10 mm spherical clearance. Max. liquid temperature: 40° C, short term up to 60° C.

MOTOR

Fully submersible, pressure tight electric motor, oil-filled. Insulation class H. Motor protection IP 68. Cable connection chamber totally isolated from motor housing.

IMPELLER

Impeller of the H82 / H16 series.

For optimum adaptation to the pump medium and operating conditions.

OPEN MULTI-CHANNEL IMPELLER

For dirty and muddy media with solids.

Scroll to Top
Scroll to Top