SPECIFICATIONS
Motor power P1 |
1,7 – 6,1 kW |
Motor power P2 |
1,2 – 4,5 kW |
Speed |
700 / 1400 rpm |
INSTALLATION
Installation and lifting device for individual mixer positioning and vertically adjustable.
MATERIALS
Propeller (Stainless steel 1.4436) Motor- /Propellershaft (Stainless steel 1.4462) Motor housing (Stainless steel 1.4436) Motor bearing cover (Stainless steel 1.4436) Bolts (Stainless steel) Elastomeres (Viton) Cable jacket (Polyolefine) Installation system (Stainless steel 1.4571) Mechanical seal on medium side (SiC / SiC) Mechanical seal on motor side (SiC / SiC) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Double row angular ball bearing)
PUMPED LIQUID
Max. medium temperature: 40 °C, short term up to 60 °C.
MOTOR
Electric motors, with 4-6 pole motor speed. Insulation class H, degree of protection IP 68.Thermal sensors embedded in the stator winding protect the motor from overheating. PTC sensors on request. With seal probe in oil chamber.
SHAFT/BEARING
Large diameter stainless steel rotor shaft, pre-lubricated bearings.
SEALS
Propeller shaft sealing by mechanical seal in oil chamber, sealed from motor chamber by mechanical seal.
PROPELLER
2-blade propeller, self cleaning design, stainless steel
FEATURES
Robust stainless steel mixer made entirely of stainless steel cast and thus particularly suitable for use in corrosive liquids. Compact design by direct drive for installation in buildings with small space available. Suitable for installation on the basin floor due to small propeller diameters. Further mounting possibilities via system dependent lowering device in pump shafts and at basin walls. The production from high-quality components as well as standard monitoring devices within the stainless steel mixer ensure long service life and a high process reliability.