Jacket cooled submersible pumps, wet-rotor, for permanent operation
CHARACTERISTICS
Submersible pumps for clear and drainage water – C135
APPLICATION
The C 135 W pump is suitable for water circulation in garden ponds and cascades, irrigation, water transfer and drainage in clear or waste water.
SPECIFICATIONS
Spherical clearance | Max. flow |
8 mm | 8,0 m³/h |
Discharge size | Motor power P1 |
G 1 “M” | 0,14 kW |
Max. head | Motor power P2 |
6 m | 0,10 kW |
INSTALLATION
Permanent or transportable.
MATERIALS
Motor housing, motor shaft, screws (Stainless steel) Suction sieve, pump housing (Wear resistant synthetic material, composite) Impeller (Glass-fibre, reinforced synthetic material (composite)) Elastomere (NBR)
PUMPED LIQUID
Clean or waste water containing soft solids with a diameter or max. 8 mm. Max. liquid temparature: 35°C, short term up to 60°C.
MOTOR
Canned wet-rotor, seal-less, rotor shaft lubricated by pumped liquid. Insulation class B. Motor protection IP 68.
FEATURES
The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation.
IMPELLER
Impeller of the C135 series.
For optimum adaptation to the pump medium and operating conditions.
