Wear resistant submersible pumps
CHARACTERISTICS
Submersible pumps for clear and drainage water – H125
APPLICATION
HOMA H 125 is wear resistant submersible drainage pump. This is the ideal solution to pump clear water or drainage water with abrasive sand or slurry. This is used to pump surface water from sumps, subway and building sites, for supply of industrial water, applications on board ships etc.
SPECIFICATIONS
Spherical clearance | Max. flow |
10 mm | 80,0 m³/h |
Discharge size | Motor power P1 |
G 2½ M | 3,5 kW |
Max. head | Motor power P2 |
21 m | 2,8 kW |
INSTALLATION
Permanent or transportable. Model with float switch control for automatic pump operation, depending on liquid level in the sump.
MATERIALS
Pump housing (Aluminium rubberized) Suction sieve, elbow, motor bearing housing, motor housing, motor housing cover (Aluminium) Impeller, bottom plate (Cast iron GG 25/EN-GJL-250) Rotor shaft, screws (Stainless steel) Mechanical seals (Silicon-carbide, Carbongraphite/chromesteel) Seal kit (Perbonane)
PUMPED LIQUID
Clear water or drainage water with abrasive (eg. sand) solids. Max. liquid temperature: 40° C, short term up to 60° C.
MOTOR
Fully submersible, pressure tight electric motor, oil-filled. Insulation class H. Degree of protection IP 68. Cable connection chamber totally isolated from motor housing.
IMPELLER
Impeller of the H125 series.
For optimum adaptation to the pump medium and operating conditions.
OPEN MULTI-CHANNEL IMPELLER
For dirty and muddy media with solids.