Motor power P1
G 1½ F
1,3 – 2,5 kW
Motor power P2
20,4 – 33,2 m
0,9 – 1,9 kW
18,7 – 20,9 m³/h
Collecting tank (Composite) Pump housing, motor housing, impeller (Cast iron EN-GJL-250) Cutter system (Stainless steel 1.4528) Rotor shaft, screws (Stainless steel) Seal kit (NBR)
Waste water or sewage containing soft solids. Max. liquid temperature: 35°C short term up to 60°C.
Fully submersible, pressure tight electric motor, 1 Ph or 3 Ph. Thermal sensors embedded in the winding. Insulation class H. Degree of protection IP 68.
Odour and gastight plastic collecting tank. Inlets:
- DN 100/DN 40 horizontal (optional with 180 mm or 250 mm height)
- DN 100/DN 40 vertical
Air vent union: DN 70 vertical.
Connection for diaphragm pump: BSP 1“ F.
Cleaning cover with screw cap.
With the advantage of using discharge pipes either DN 40 or DN 50 diameter the construction work and the cost are lower in respect to the conventional discharge pipes. They are suitable as a single pump station (Saniboy G) or as a twin pump station (Sanimaster G).
Impeller of the Saniboy G series.
For optimum adaptation to the pump medium and operating conditions.
OPEN MULTI-CHANNEL IMPELLER
For dirty and muddy media with solids.
GRP CUTTER SYSTEM
Cutting system upstream of the impeller for grinding solids.