SPECIFICATIONS
Spherical clearance | Max. flow |
10 mm | 26,1 – 57,5 m³/h |
Discharge size | Motor power P1 |
G 2 M / G 2½ M | 0,9 – 3,5 kW |
Max. head | Motor power P2 |
11,0 – 25,0 m | 0,7 – 2,8 kW |
INSTALLATION
Transportable or permanent.
MATERIALS
Pump housing motor housing impeller (Stainless steel 1.4436) Rotor shaft (Stainless steel 1.4462) Mechanical connection parts (Stainless steel 1.4571) O-Rings (FPM (Viton)) Mechanical seals (SiC/SiC, FPM (Viton)) Shaft seal ring (FPM (Viton)) Cable protective hose (Polyolefine)
PUMPED LIQUID
Drainage water with abrasive or chemically aggressive contents, chemical liquids. PH-value 3-14, with chemically aggressive liquid may also be lower, see specific chemical resistance of used materials. Max liquid temperature: 40°C, short term up to 60°C.
MOTOR
Fully submersible, pressure tight electric motor. Insulation class H, degree of protection IP 68. Thermal sensor embedded in the winding.
IMPELLER
Impeller of the CH 432 / CH 436 series.
For optimum adaptation to the pump medium and operating conditions.
OPEN MULTI-CHANNEL IMPELLER
For dirty and muddy media with solids.